€2,100.00
GT URAGAN 3 Compact – Power and Precision in a Compact Form
The AGT URAGAN 3 Compact takes the advanced engineering of the URAGAN 3 and condenses it into a lighter, shorter, and more manoeuvrable package. Designed for shooters who demand the same cutting-edge performance in a portable format, the URAGAN 3 Compact is perfect for tight spaces, dynamic shooting scenarios, and those who value mobility without sacrificing precision.
Revolutionary Internal Upgrades
Compact Ergonomics and Versatility
Optimized Specifications for Compact Performance
Technical Data
The AGT URAGAN 3 Compact is the ultimate balance of portability and power. With its shortened profile and lightweight design, it’s perfect for shooters who need a rifle that performs flawlessly in tight spaces or during mobile scenarios. Whether you’re hunting, target shooting, or just enjoying some plinking, the URAGAN 3 Compact delivers top-tier performance and ease of use in a compact, efficient design.
Exceptional handling is provided by the AGT URAGAN 3 Compact Carbon Fibre PCP Bullpup Air Rifle whenever compact length, regulated consistency, and Czech-built accuracy are required. Moreover, a shortened bullpup layout is combined with a carbon-fibre air bottle so that agility is preserved without power being sacrificed. Consequently, field hunters, pest controllers, and target shooters alike are given a platform that remains balanced, quiet, and ready for optics from the first fill.
Furthermore, the familiar URAGAN family architecture is refined rather than reinvented. Therefore, an improved firing valve, a simplified power plenum, a new regulator, an upgraded hammer system, and a depinger are all incorporated so that shot-to-shot consistency and reduced mechanical noise are achieved together.
Lightweight rigidity is achieved through the carbon-fibre bottle and compact chassis. In addition, overall length is held near 690–700 mm while unscoped weight remains around 3.0–3.2 kg, so that extended carries and tight hides are managed with less fatigue. Meanwhile, rear-biased balance is retained by the bullpup layout; as a result, the muzzle stays controllable when the rifle is brought up quickly.
Additionally, an adjustable rubber butt pad is fitted so that length of pull and shoulder contact can be tailored. Likewise, an ambidextrous comb and rubber grip are provided so that left- and right-handed shooters are accommodated without extra hardware. Subsequently, glove-friendly trigger-guard geometry is introduced, and therefore cold-weather operation is simplified.
Consistent velocity is maintained by the onboard regulator across the working band of roughly 200–100 bar after a 300 bar fill. Moreover, a 250 cc carbon-fibre cylinder is used so that useful shot strings are delivered from a compact reservoir. Consequently, approximately 110 shots in .177, 120 shots in .22, and around 130 shots in .25 can be expected on sub-12 ft/lb setups, with actual counts varying by pellet and power setting.
Furthermore, a 400 mm shrouded CZ barrel with a 12-groove, 17:7 twist is employed. In addition, an integral moderator is built into the shroud, while M14 CW / ½” UNF-style threading is retained so that an extra silencer can be attached when even lower signature is desired. Therefore, backyard practice and discreet pest work are supported without a bulky profile being added.
Likewise, a two-stage adjustable trigger is specified so that first-stage travel and second-stage break can be set to preference. Meanwhile, a biathlon-style side lever is fitted and can be swapped from left to right, so that cocking remains natural for either hand. Subsequently, an ambidextrous slide safety above the trigger guard is included, and thus safe handling is kept within easy thumb reach.
A built-in 20 MOA Picatinny top rail is provided so that scopes, night-vision units, and thermal add-ons can be mounted with elevation already biased for longer airgun ranges. Additionally, a lower Picatinny section with bottle guard plus a forward Keymod / M-LOK style interface is supplied; as a result, bipods, lights, and other supports can be attached without aftermarket adapters.
Moreover, rotary magazines are supplied in typical capacities of 15 rounds in .177, 12 in .22, and 10 in .25. Consequently, rapid follow-up shots are enabled while pellet orientation remains straightforward. Furthermore, a visible pressure gauge is fitted so that remaining air can be checked at a glance before a session is started.
Flexibility is offered across .177, .22, and .25 so that paper, small game, and heavier pest work can each be matched. Moreover, regulated output is kept even as the bottle pressure falls, and therefore grouping is not abandoned mid-string. Additionally, FAC / high-power variants with assisted valves and fuller regulator adjustability are produced for licensed markets; consequently, the same compact envelope can be specified where higher energy is legally permitted.
Furthermore, accessory support is already built in. Therefore, a compact optic can be mounted on the 20 MOA rail, a bipod can be locked to the forend interface, and a second moderator can be threaded on when extra suppression is preferred. Likewise, the included magazines and fill probe allow the rifle to be put into service immediately after unboxing.
Confined hides, vehicle-to-field transitions, and woodland lanes are handled more easily because overall length stays short. Meanwhile, the carbon bottle reduces carry weight, so that longer walks to permission ground remain realistic. In addition, the depinger and shrouded barrel keep report modest; as a result, livestock and neighbours are less likely to be disturbed during lawful pest control.
Moreover, HFT-style positional shooting and club practice benefit from the adjustable trigger and rear-heavy balance. Subsequently, follow-up shots are cycled with the side lever without the rifle being taken far off the shoulder. Therefore, both deliberate single shots and measured strings can be delivered from the same platform.
Durability is prioritised through the revised valve and hammer assembly, while service is simplified by the cleaner plenum layout. Additionally, Czech barrel quality is paired with regulation so that consistency is not left to chance. Consequently, the AGT URAGAN 3 Compact Carbon Fibre PCP Bullpup Air Rifle is positioned for shooters who want bullpup handling, carbon-fibre lightness, and regulated PCP manners in one short package.
Finally, responsible use, local licensing, and safe storage remain essential. When those requirements are met, a highly portable, optics-ready, magazine-fed compact is placed in the hands of hunters, pest controllers, and precision enthusiasts who refuse to trade accuracy for size.
Versatility across lawful roles is provided by the AGT URAGAN 3 Compact Carbon Fibre PCP Bullpup Air Rifle whenever calibre choice, regulated power, FAC options, and ready-to-fit accessories must be matched to the shooter’s ground. Moreover, a compact 400 mm CZ barrel, a 250 cc carbon-fibre bottle, and an onboard regulator are combined so that each chambering can be used with consistent velocity rather than fading mid-string. Consequently, paper work, pest control, and licensed higher-energy use can all be specified from the same short bullpup platform.
Furthermore, magazine capacity, shot count, and thread/rail interfaces are already engineered around those calibres. Therefore, pellets, optics, bipods, extra moderators, and fill hardware can be added without the chassis being redesigned.
Three principal chamberings are commonly offered so that trajectory, energy, and pellet availability can be balanced. In addition, rotary magazines are supplied to match each bore:
Meanwhile, pellet seating remains simple because the magazines are loaded without a winding mechanism. Subsequently, a spare magazine can be carried so that a second string is ready before the first is emptied. Likewise, calibre markings on the magazine body help mix-ups to be avoided when more than one rifle is kept.
Additionally, some retailers list further FAC-oriented options such as .30 where licensing and factory availability allow. However, the Compact Carbon Fibre configuration is most widely catalogued in .177, .22, and .25, and therefore those three should be treated as the core range unless a special-order FAC build is confirmed.
Consistent muzzle energy is maintained by the new regulator across an operational band of roughly 200–100 bar after a 300 bar fill. Moreover, a simplified power plenum and revised firing valve are used so that airflow remains efficient as bottle pressure falls. Consequently, grouping is not abandoned halfway through a fill.
Furthermore, UK-style sub-12 ft/lb examples are commonly quoted around 11.5 ft/lb. In addition, approximate shot counts on those settings are often listed near:
Nevertheless, actual strings vary with pellet weight, valve tune, temperature, and regulator setting. Therefore, a chronograph check after the chosen pellet is selected remains the reliable way to confirm both energy and usable count. Likewise, the onboard pressure gauge allows remaining air to be read before a session is started, so that an unexpected drop-off is avoided.
Meanwhile, the 400 mm shrouded CZ barrel (12 grooves, 17:7 twist) is retained across these calibres. As a result, spin and moderation are delivered in a compact envelope rather than a long-barrel profile being required.
Licensed higher output is available on FAC / high-power versions when local law permits. Moreover, a high-power assisted valve, fuller regulator adjustability, and removal of compliance restrictors are specified on those special-order builds. Consequently, the same compact carbon-fibre bullpup can be configured for markets where energy above the standard limit is authorised.
Additionally, FAC examples remain regulated rather than unregulated dump guns. Therefore, velocity consistency is still pursued even when power is raised. Subsequently, magazine capacity, rail layout, side-lever geometry, and the 250 cc carbon bottle are kept, so that handling does not change when a licensed higher-energy valve is fitted.
However, FAC rifles must be held only where a valid certificate and local rules allow. Likewise, transport, storage, and use remain subject to those conditions. Inclusive language applies equally here: every shooter—left- or right-handed, new or experienced—is expected to verify licensing before a high-power variant is ordered.
Field readiness is supported by interfaces that are fitted from the factory. Moreover, a 20 MOA Picatinny top rail is integrated so that scopes, night-vision units, and thermal add-ons can be mounted with elevation already biased for airgun distances. In addition, a lower Picatinny section with bottle guard plus a forward Keymod / M-LOK style forend is provided; as a result, bipods, lights, and other supports can be locked on without extra adapters.
Furthermore, the shroud includes an integral moderator, while M14 CW / ½” UNF-style threading is retained. Therefore, a second silencer can be attached when extra suppression is preferred. Likewise, the swappable biathlon side lever and ambidextrous safety allow accessories and handling to stay comfortable for either hand.
Common package items that are frequently supplied with the rifle include:
Additionally, aftermarket support is straightforward because Picatinny, Keymod/M-LOK, and standard moderator threads are used. Consequently, a compact optic, a lightweight bipod, a sling solution where studs or rail adapters are added, and extra magazines can all be specified without custom machining.
Small-quarry and paper work are often assigned to .177 because trajectory stays flat and magazine capacity is highest. Meanwhile, general pest control is frequently given to .22 because energy and pellet choice are widely available. Subsequently, heavier pests on suitable permissions are more often paired with .25 when extra momentum is wanted and local law allows.
Moreover, sub-12 ft/lb Compact Carbon Fibre rifles remain the default for many club and permission users. In contrast, FAC valves are reserved for licensed ground where higher energy is both legal and necessary. Therefore, accessories should be chosen after power and calibre are fixed: a lighter optic suits the 3.0–3.2 kg chassis on legal-limit guns, while a more robust night-vision setup may be justified on an FAC build that will be used after dark.
Finally, fill hardware, spare magazines, and a second moderator complete a practical kit. When those items are combined with the regulated 250 cc carbon bottle and the 400 mm shrouded CZ barrel, the AGT URAGAN 3 Compact Carbon Fibre PCP Bullpup Air Rifle is left ready for the calibre, power level, and accessory set that the shooter’s permissions actually require.
Everyday work is handled more easily when a short, regulated, carbon-fibre bullpup is carried rather than a long-barrel sporter. Moreover, confined hides, vehicle doors, woodland rides, and awkward kneeling positions are all accommodated because overall length stays modest and balance remains rear-biased. Consequently, the rifle can be brought onto quarry or a target without extra barrel being swung through brush or window frames.
Furthermore, fatigue is reduced by the light bottle and compact chassis. Therefore, longer walks across permission ground remain realistic, and a full morning of pest control can be completed without the shoulder being overloaded. Likewise, left- and right-handed shooters are included because the side lever can be swapped and the safety can be reached from either side.
Quiet approaches along hedges are supported by the shrouded barrel and depinger. In addition, report is kept modest so that livestock and neighbours are less likely to be disturbed during lawful work. Meanwhile, the regulator holds velocity as bottle pressure falls; as a result, the first shot from a cold rifle and the last shot of a string can be aimed with similar holdover.
Additionally, .22 is often chosen for general rabbits and similar quarry because pellet choice is wide and energy remains useful inside typical airgun distances. Subsequently, .177 may be preferred where flatter trajectory and higher magazine capacity matter more than extra momentum. Conversely, .25 is reserved for heavier pests on suitable ground when local rules allow that chambering.
Moreover, follow-up shots are cycled with the biathlon lever without the rifle being taken far off the shoulder. Therefore, a second pellet can be sent if the first is deflected by vegetation. Likewise, a spare magazine can be kept in a pocket so that a second string is ready before the first is emptied.45 70 double rifle.bel air gun.second air
Cold mornings are also considered. Consequently, the enlarged trigger guard allows gloved operation, and the rubber butt pad keeps the stock planted when clothing is bulky. Afterward, the pressure gauge is checked so that a low bottle is not carried into the next field by mistake.double rifle 45 70.marksman’s rifle.marks man
Tight hides and barn doors favour a short muzzle. Moreover, the bullpup layout keeps the action over the shoulder rather than ahead of the trigger hand, and therefore the rifle can be rested on a window ledge or bale without excessive overhang. In addition, the 20 MOA top rail accepts a compact scope or a night-vision unit, so that last-light and after-dark sessions can be conducted when permissions allow.
Furthermore, a bipod or short sticks can be locked to the lower rail or Keymod-style forend. As a result, a stable rest is obtained without a bulky chassis being added. Meanwhile, an extra moderator can be threaded on when even lower signature is required beside buildings
| Caliber | .177, .22, .25, .30 |
|---|
Calibers: Most common are .177 (4.5mm) for speed/flat trajectory and general use, and .22 (5.5mm) for better hunting knockdown power. Larger “big bore” (.25, .30, .357+) exist for hunting bigger game where legal.
Yes, many modern PCP and springers deliver enough energy for small game (rabbits, squirrels, birds) and even larger game in some areas. Muzzle energy (in ft-lbs or joules) matters more than velocity alone. Always match caliber, pellet weight, and energy to the game and check local hunting regs.
Treat every airgun as if it is loaded.
Follow these rules strictly—airguns cause real injuries.
Laws differ dramatically by country, state/province, and even city. Always verify current local laws before buying, owning, transporting, or using an airgun. Age restrictions (often 18+) are common.
Examples (summaries only; check official sources):
Resources: Wikipedia “Air gun laws”, airgun forums, or official government sites. For travel, research transit laws carefully.
Consider:
Buy from reputable dealers and consider warranties.
Follow your model’s manual. Basic care extends life significantly.
Pellets are the most common projectile (lead or lead-free). Match them to your gun, caliber, and purpose—test several brands as accuracy varies by barrel.
Tips: Heavier pellets in .22/.25 for hunting (better momentum). Lighter in .177 for speed/flat trajectory. Always check head size fit (e.g., 4.51-4.53mm variants).
Muzzle energy (ft-lbs or joules) matters more than velocity. Ethical shots require precise placement (head/heart-lung) within effective range.
Rough Guidelines (adjust for distance, pellet, and local laws):
PCPs dominate serious hunting due to power and shot count. Springers/gas rams work well for small game but require skill. Always prioritize clean kills and check seasons/species rules.
Common Issues:
Toggle Content
Budget Tip: Start with a quality springer (~$150-400) before investing in PCP setup.
Airgunning offers endless depth—from backyard plinking to precision competition and ethical hunting. Prioritize safety, legality, and practice. If you want specifics (e.g., recommendations for a country, budget, hunting small game, or a particular type like PCP vs springer), let me know for more targeted info! Shoot responsibly.
Tuning improves accuracy, reduces noise/recoil, or increases power (within legal limits).
Caution: Check laws—power increases may reclassify your gun. DIY only if experienced; professional tuners recommended.
You must be at least 18 years old to purchase any airgun or related accessories from our store. By placing an order, you confirm that you meet the legal age requirements in your state or country.
Yes. Orders may require age verification before processing and shipping. In some cases, we may request a valid government-issued ID to confirm eligibility.
Reviews
There are no reviews yet.