AirMaks Arms Carbon Fibre Wrapped Air Cylinder (Internal M18x1.5 thread) 480cc.
Advanced Carbon Fibre Construction and High-Quality Engineering
Reliable air storage is essential for maintaining the performance and consistency of compatible pre-charged pneumatic (PCP) equipment. Therefore, the AirMaks Arms Carbon Fibre Wrapped Air Cylinder 480cc has been designed as a replacement air-storage component for compatible AirMaks Arms systems.
Featuring a carbon-fibre-wrapped construction, this cylinder is intended to provide a lightweight alternative to conventional air-storage designs. Furthermore, a durable composite exterior is incorporated to support the cylinder’s structural design while keeping unnecessary weight to a minimum.
With a stated capacity of 480cc, sufficient internal volume is provided for the intended equipment configuration. In addition, an internal M18x1.5 thread is specified for compatibility with systems designed around that exact connection standard.
Whether a replacement component is being sourced or an existing compatible configuration is being maintained, a correctly specified cylinder is essential. Consequently, attention should be given to thread dimensions, manufacturer compatibility, cylinder certification and service-life requirements before a purchase is made.
Key Product Features
-
Brand: AirMaks Arms
-
Product: Carbon Fibre Wrapped Air Cylinder
-
Capacity: 480cc
-
Construction: Carbon-fibre-wrapped composite design
-
Connection: Internal M18x1.5 thread
-
Application: Compatible PCP air-storage systems
-
Design: Lightweight composite construction
-
Purpose: Replacement or manufacturer-approved component
-
Compatibility: Must be verified against the original equipment specifications
480cc Capacity for Compatible PCP Platforms
A 480cc internal volume is provided to accommodate the requirements of compatible PCP air systems. Compared with smaller cylinder options, additional air-storage capacity is made available within the same product category.
Moreover, the cylinder has been designed around the AirMaks Arms replacement-component specification. As a result, it can be considered when an original cylinder requires replacement or when an approved alternative configuration is being sourced.
The 480cc capacity is particularly important when the correct replacement specification is being matched. Nevertheless, actual performance and air consumption will be determined by the complete equipment configuration, operating conditions and manufacturer specifications.
Carbon Fibre Wrapped Construction
A carbon-fibre-wrapped exterior is featured as one of the principal characteristics of this replacement cylinder. Through this construction, a lightweight composite design is provided while the required pressure-vessel integrity is maintained.
Furthermore, carbon-fibre composite construction is widely used in specialist compressed-gas storage applications because of its favourable strength-to-weight characteristics.
The external finish also provides a distinctive appearance that is consistent with modern PCP equipment. Consequently, the cylinder can be selected where the original carbon-fibre component is being replaced with a matching manufacturer-specified part.
Internal M18x1.5 Thread Specification
Correct thread compatibility is essential when replacement pressure cylinders are being selected. For this reason, an internal M18x1.5 thread has been specified for this AirMaks Arms component.
This connection specification must be matched with the corresponding manufacturer-approved interface. Although similar-looking cylinders may be available, differences in thread dimensions and connection designs should never be overlooked.
Therefore, compatibility should be confirmed using the original equipment documentation or through an authorised AirMaks Arms service provider before ordering.
Air Pressure Rating and Safety Considerations
The 480cc cylinder is listed by specialist retailers with a maximum working pressure of 300 bar. This specification should be treated as a critical pressure-vessel rating rather than a general operating recommendation.
Utah Airguns+1
Additionally, the cylinder should only be handled, inspected and maintained in accordance with its manufacturer’s instructions.
For safety and long-term reliability, the following considerations should be observed:
-
The manufacturer’s pressure rating must never be exceeded.
-
Only approved filling equipment and compatible connections should be used.
-
Physical damage, impact marks, corrosion or signs of deterioration should be assessed by a qualified professional.
-
Pressure-vessel inspection and service-life requirements must be followed.
-
Unauthorised modifications and repairs should be avoided.
-
A damaged or out-of-date cylinder should not be returned to service without professional clearance.
Importantly, carbon-fibre pressure vessels are subject to inspection and service-life requirements. Therefore, certification, manufacturing date and applicable expiry information should be verified before purchase.
Compatibility with AirMaks Arms Equipment
The cylinder has been marketed as a replacement component for compatible AirMaks Arms PCP platforms. The Katran and Krait families are among the systems identified by specialist retailers in connection with the 480cc cylinder.
zbrane-vzduchovky.cz+2
However, the exact compatibility will depend on the specific model and configuration.
For example, the installation arrangement and pressure-release requirements can differ between platforms. Consequently, the cylinder should not be assumed to be interchangeable across every AirMaks Arms model.
Before an order is placed, the original cylinder reference, connection specification and approved accessory requirements should be checked.
Replacement Component for Maintenance and Equipment Restoration
When an original air cylinder has reached the end of its approved service life, a manufacturer-compatible replacement may be required. In such circumstances, the correct capacity and connection specification should be prioritised.
The AirMaks Arms 480cc carbon-fibre-wrapped cylinder has been developed for this replacement-part category. Furthermore, its clearly identified internal M18x1.5 connection makes product identification easier when the original equipment specification is known.
Whether an existing component is being replaced or a compatible spare is being sourced, the correct manufacturer specification should always be maintained.
Why Choose the AirMaks Arms 480cc Carbon Fibre Cylinder?
Several important characteristics are combined in this replacement component:
-
Recognised manufacturer: An original AirMaks Arms replacement component is supplied.
-
480cc capacity: A clearly specified internal volume is provided.
-
Carbon-fibre construction: A lightweight composite exterior is featured.
-
M18x1.5 connection: An internal thread specification is provided for compatible equipment.
-
300-bar rating: A maximum working pressure is listed by specialist retailers.
-
Replacement suitability: A manufacturer-compatible replacement option is provided for supported platforms.
-
Specialist application: The component is intended for compatible PCP air-storage systems.
Ultimately, the correct replacement cylinder should be selected through verified model compatibility and pressure-vessel documentation rather than appearance alone.
Package Contents
One AirMaks Arms Carbon Fibre Wrapped Air Cylinder, 480cc, with internal M18x1.5 thread.
Please note: Additional adapters, filling equipment and installation accessories are not included unless explicitly stated in the product listing.
Frequently Considered Purchase Information
Is this an original AirMaks Arms component?
Yes. It is listed as an AirMaks Arms carbon-fibre-wrapped replacement cylinder.
What is its capacity?
A capacity of 480cc is provided.
Which thread is fitted?
An internal M18x1.5 thread is specified.
What is the maximum working pressure?
A maximum working pressure of 300 bar is listed by specialist retailers.
Can it be used with every AirMaks Arms rifle?
No universal compatibility should be assumed. The specific rifle model and connection requirements must be verified.
Is it suitable as a replacement cylinder?
Yes, where the original equipment specification and manufacturer compatibility have been confirmed.
Are adapters included?
The standard product listing identifies the cylinder itself. Additional adapters should be purchased separately where required.
Product Specifications
| Specification | Details |
|---|---|
| Brand | AirMaks Arms |
| Product type | Replacement air cylinder |
| Capacity | 480cc |
| Material | Carbon-fibre wrapped |
| Thread | Internal M18x1.5 |
| Maximum working pressure | 300 bar |
| Diameter | Approximately 62mm |
| Overall length | Approximately 260mm |
| Product reference | AMBTL480 |
| Intended application | Compatible PCP systems |
Specifications cross-checked against specialist retailer listings. Confirm the exact cylinder markings and manufacturer documentation before purchase.




Reviews
There are no reviews yet.